E_user 04.05.2011 18:31
Есть проблема! — [РЕШЕНО] - установка и запуск X11 на Gentoo
Доброе время суток,пытаюсь поставить X-server на Gentoo, но постоянно терплю неудачу. Устанавливал по gentoo-wiki.info/Xorg/Install. При попытке запустить иксы startx
xauth: file /root/.serverauth.3659 does not exist
X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-gentoo-r4 i686 Gentoo
Current Operating System: Linux Josh 2.6.37-gentoo-r4 #1 SMP Tue May 3 22:13:20 CEST 2011 i686
Kernel command line: BOOT_IMAGE=/boot/kernel-2.6.37-gentoo-r4 root=/dev/sda2 ro
Build Date: 06 May 2011 01:31:14AM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri May 6 18:39:35 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
/etc/X11/xinit/xinitrc: line 63: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 60: xclock: command not found
/etc/X11/xinit/xinitrc: line 62: xterm: command not found
/etc/X11/xinit/xinitrc: line 59: twm: command not found
xinit: connection to X server lost
waiting for X server to shut down
X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-gentoo-r4 i686 Gentoo
Current Operating System: Linux Josh 2.6.37-gentoo-r4 #1 SMP Tue May 3 22:13:20 CEST 2011 i686
Kernel command line: BOOT_IMAGE=/boot/kernel-2.6.37-gentoo-r4 root=/dev/sda2 ro
Build Date: 06 May 2011 01:31:14AM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri May 6 18:39:35 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
/etc/X11/xinit/xinitrc: line 63: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 60: xclock: command not found
/etc/X11/xinit/xinitrc: line 62: xterm: command not found
/etc/X11/xinit/xinitrc: line 59: twm: command not found
xinit: connection to X server lost
waiting for X server to shut down
Log file: "/var/log/Xorg.0.log"
X.Org X Server 1.9.4
Release Date: 2011-02-04
[ 23098.346] X Protocol Version 11, Revision 0
[ 23098.346] Build Operating System: Linux 2.6.37-gentoo-r4 i686 Gentoo
[ 23098.346] Current Operating System: Linux Josh 2.6.37-gentoo-r4 #1 SMP Tue May 3 22:13:20 CEST 2011 i686
[ 23098.346] Kernel command line: BOOT_IMAGE=/boot/kernel-2.6.37-gentoo-r4 root=/dev/sda2 ro
[ 23098.346] Build Date: 06 May 2011 01:31:14AM
[ 23098.346]
[ 23098.346] Current version of pixman: 0.20.2
[ 23098.346] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23098.346] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23098.347] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 6 17:47:48 2011
[ 23098.347] (==) Using config file: "/etc/X11/xorg.conf"
[ 23098.347] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23098.348] (==) ServerLayout "X.org Configured"
[ 23098.348] (**) |-->Screen "Screen0" (0)
[ 23098.348] (**) | |-->Monitor "Monitor0"
[ 23098.348] (**) | |-->Device "Card0"
[ 23098.348] (**) |-->Input Device "Mouse0"
[ 23098.348] (**) |-->Input Device "Keyboard0"
[ 23098.348] (==) Automatically adding devices
[ 23098.348] (==) Automatically enabling devices
[ 23098.349] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 23098.349] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 23098.349] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 23098.349] (WW) Disabling Mouse0
[ 23098.349] (WW) Disabling Keyboard0
[ 23098.349] (II) Loader magic: 0x8200de0
[ 23098.349] (II) Module ABI versions:
[ 23098.349] X.Org ANSI C Emulation: 0.4
[ 23098.349] X.Org Video Driver: 8.0
[ 23098.349] X.Org XInput driver : 11.0
[ 23098.349] X.Org Server Extension : 4.0
[ 23098.351] (--) PCI:*(0:3:0:0) 10de:0a64:1043:841f rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[ 23098.351] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 23098.351] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) LoadModule: "dbe"
[ 23098.352] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23098.352] (II) Module dbe: vendor="X.Org Foundation"
[ 23098.352] compiled for 1.9.4, module version = 1.0.0
[ 23098.352] Module class: X.Org Server Extension
[ 23098.352] ABI class: X.Org Server Extension, version 4.0
[ 23098.352] (II) Loading extension DOUBLE-BUFFER
[ 23098.352] (II) LoadModule: "glx"
[ 23098.353] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23098.353] (II) Module glx: vendor="X.Org Foundation"
[ 23098.353] compiled for 1.9.4, module version = 1.0.0
[ 23098.353] ABI class: X.Org Server Extension, version 4.0
[ 23098.353] (==) AIGLX enabled
[ 23098.353] (II) Loading extension GLX
[ 23098.353] (II) LoadModule: "dri"
[ 23098.354] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23098.354] (II) Module dri: vendor="X.Org Foundation"
[ 23098.354] compiled for 1.9.4, module version = 1.0.0
[ 23098.354] ABI class: X.Org Server Extension, version 4.0
[ 23098.354] (II) Loading extension XFree86-DRI
[ 23098.354] (II) LoadModule: "dri2"
[ 23098.355] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23098.355] (II) Module dri2: vendor="X.Org Foundation"
[ 23098.355] compiled for 1.9.4, module version = 1.2.0
[ 23098.355] ABI class: X.Org Server Extension, version 4.0
[ 23098.355] (II) Loading extension DRI2
[ 23098.355] (II) LoadModule: "extmod"
[ 23098.355] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23098.356] (II) Module extmod: vendor="X.Org Foundation"
[ 23098.356] compiled for 1.9.4, module version = 1.0.0
[ 23098.356] Module class: X.Org Server Extension
[ 23098.356] ABI class: X.Org Server Extension, version 4.0
[ 23098.356] (II) Loading extension MIT-SCREEN-SAVER
[ 23098.356] (II) Loading extension XFree86-VidModeExtension
[ 23098.356] (II) Loading extension XFree86-DGA
[ 23098.356] (II) Loading extension DPMS
[ 23098.356] (II) Loading extension XVideo
[ 23098.356] (II) Loading extension XVideo-MotionCompensation
[ 23098.356] (II) Loading extension X-Resource
[ 23098.356] (II) LoadModule: "record"
[ 23098.356] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23098.356] (II) Module record: vendor="X.Org Foundation"
[ 23098.356] compiled for 1.9.4, module version = 1.13.0
[ 23098.357] Module class: X.Org Server Extension
[ 23098.357] ABI class: X.Org Server Extension, version 4.0
[ 23098.357] (II) Loading extension RECORD
[ 23098.357] (II) LoadModule: "nvidia"
[ 23098.357] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 23098.357] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 23098.358] compiled for 4.0.2, module version = 1.0.0
[ 23098.358] Module class: X.Org Video Driver
[ 23098.358] (II) NVIDIA dlloader X Driver 260.19.36 Tue Jan 18 17:12:14 PST 2011
[ 23098.358] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 23098.358] (--) using VT number 7
[ 23098.372] (II) Loading sub module "fb"
[ 23098.372] (II) LoadModule: "fb"
[ 23098.372] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23098.373] (II) Module fb: vendor="X.Org Foundation"
[ 23098.373] compiled for 1.9.4, module version = 1.0.0
[ 23098.373] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23098.373] (II) Loading sub module "wfb"
[ 23098.373] (II) LoadModule: "wfb"
[ 23098.373] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 23098.374] (II) Module wfb: vendor="X.Org Foundation"
[ 23098.374] compiled for 1.9.4, module version = 1.0.0
[ 23098.374] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23098.374] (II) Loading sub module "ramdac"
[ 23098.374] (II) LoadModule: "ramdac"
[ 23098.374] (II) Module "ramdac" already built-in
[ 23098.374] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 23098.374] (==) NVIDIA(0): RGB weight 888
[ 23098.374] (==) NVIDIA(0): Default visual is TrueColor
[ 23098.374] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23098.375] (**) NVIDIA(0): Enabling RENDER acceleration
[ 23098.375] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 23098.375] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 23098.375] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 23098.375] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 23098.375] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 23098.966] (II) NVIDIA(0): NVIDIA GPU ION (GT218) at PCI:3:0:0 (GPU-0)
[ 23098.966] (--) NVIDIA(0): Memory: 524288 kBytes
[ 23098.966] (--) NVIDIA(0): VideoBIOS: 70.18.5d.00.1d
[ 23098.966] (II) NVIDIA(0): Detected PCI Express Link width: 1X
[ 23098.966] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 23098.966] (--) NVIDIA(0): Connected display device(s) on ION at PCI:3:0:0
[ 23098.966] (--) NVIDIA(0): Samsung SyncMaster (DFP-0)
[ 23098.966] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 23098.966] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[ 23099.053] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 23099.053] (II) NVIDIA(0): Validated modes:
[ 23099.053] (II) NVIDIA(0): "1400x1050"
[ 23099.053] (II) NVIDIA(0): Virtual screen size determined to be 1400 x 1050
[ 23099.088] (--) NVIDIA(0): DPI set to (86, 88); computed from "UseEdidDpi" X config
[ 23099.088] (--) NVIDIA(0): option
[ 23099.089] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 23099.089] (--) Depth 24 pixmap format is 32 bpp
[ 23099.089] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 23099.090] (II) NVIDIA(0): Initialized GPU GART.
[ 23099.096] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 23099.096] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 23099.096] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 23099.096] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 23099.096] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 23099.096] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 23099.096] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 23099.096] (II) NVIDIA(0): Config Options in the README.
[ 23099.097] (II) NVIDIA(0): Setting mode "1400x1050"
[ 23099.173] (II) Loading extension NV-GLX
[ 23099.213] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 23099.233] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 23099.233] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 23099.233] (==) NVIDIA(0): Backing store disabled
[ 23099.233] (==) NVIDIA(0): Silken mouse enabled
[ 23099.236] (==) NVIDIA(0): DPMS enabled
[ 23099.236] (II) Loading extension NV-CONTROL
[ 23099.237] (II) Loading extension XINERAMA
[ 23099.237] (II) Loading sub module "dri2"
[ 23099.237] (II) LoadModule: "dri2"
[ 23099.237] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23099.237] (II) NVIDIA(0): [DRI2] Setup complete
[ 23099.237] (==) RandR enabled
[ 23099.237] (II) Initializing built-in extension Generic Event Extension
[ 23099.237] (II) Initializing built-in extension SHAPE
[ 23099.237] (II) Initializing built-in extension MIT-SHM
[ 23099.238] (II) Initializing built-in extension XInputExtension
[ 23099.238] (II) Initializing built-in extension XTEST
[ 23099.238] (II) Initializing built-in extension BIG-REQUESTS
[ 23099.238] (II) Initializing built-in extension SYNC
[ 23099.238] (II) Initializing built-in extension XKEYBOARD
[ 23099.238] (II) Initializing built-in extension XC-MISC
[ 23099.238] (II) Initializing built-in extension XINERAMA
[ 23099.238] (II) Initializing built-in extension XFIXES
[ 23099.238] (II) Initializing built-in extension RENDER
[ 23099.238] (II) Initializing built-in extension RANDR
[ 23099.238] (II) Initializing built-in extension COMPOSITE
[ 23099.238] (II) Initializing built-in extension DAMAGE
[ 23099.264] (II) AIGLX: Screen 0 is not DRI2 capable
[ 23099.264] (II) AIGLX: Screen 0 is not DRI capable
[ 23099.271] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 23099.271] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 23099.858] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 23099.858] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23099.858] (II) LoadModule: "evdev"
[ 23099.859] (WW) Warning, couldn't open module evdev
[ 23099.859] (II) UnloadModule: "evdev"
[ 23099.859] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.859] (EE) No input driver matching `evdev'
[ 23099.867] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 23099.867] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23099.867] (II) LoadModule: "evdev"
[ 23099.868] (WW) Warning, couldn't open module evdev
[ 23099.868] (II) UnloadModule: "evdev"
[ 23099.868] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.868] (EE) No input driver matching `evdev'
[ 23099.882] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse (/dev/input/event2)
[ 23099.882] (**) Full-Speed Mouse Full-Speed Mouse: Applying InputClass "evdev pointer catchall"
[ 23099.882] (II) LoadModule: "evdev"
[ 23099.883] (WW) Warning, couldn't open module evdev
[ 23099.883] (II) UnloadModule: "evdev"
[ 23099.883] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.883] (EE) No input driver matching `evdev'
[ 23099.884] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse (/dev/input/mouse0)
[ 23099.884] (II) No input driver/identifier specified (ignoring)
[ 23099.886] (II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event3)
[ 23099.886] (**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 23099.886] (II) LoadModule: "evdev"
[ 23099.887] (WW) Warning, couldn't open module evdev
[ 23099.887] (II) UnloadModule: "evdev"
[ 23099.887] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.887] (EE) No input driver matching `evdev'
[ 23099.888] (II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event4)
[ 23099.888] (**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 23099.888] (II) LoadModule: "evdev"
[ 23099.889] (WW) Warning, couldn't open module evdev
[ 23099.889] (II) UnloadModule: "evdev"
[ 23099.889] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.889] (EE) No input driver matching `evdev'
[ 23099.892] (II) config/udev: Adding input device PHILIPS MCE USB IR Receiver- Spinel plusf0r ASUS (/dev/input/event5)
[ 23099.892] (**) PHILIPS MCE USB IR Receiver- Spinel plusf0r ASUS: Applying InputClass "evdev pointer catchall"
[ 23099.892] (**) PHILIPS MCE USB IR Receiver- Spinel plusf0r ASUS: Applying InputClass "evdev keyboard catchall"
[ 23099.892] (II) LoadModule: "evdev"
[ 23099.893] (WW) Warning, couldn't open module evdev
[ 23099.893] (II) UnloadModule: "evdev"
[ 23099.893] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.893] (EE) No input driver matching `evdev'
[ 23099.894] (II) config/udev: Adding input device PHILIPS MCE USB IR Receiver- Spinel plusf0r ASUS (/dev/input/mouse1)
[ 23099.894] (II) No input driver/identifier specified (ignoring)
Release Date: 2011-02-04
[ 23098.346] X Protocol Version 11, Revision 0
[ 23098.346] Build Operating System: Linux 2.6.37-gentoo-r4 i686 Gentoo
[ 23098.346] Current Operating System: Linux Josh 2.6.37-gentoo-r4 #1 SMP Tue May 3 22:13:20 CEST 2011 i686
[ 23098.346] Kernel command line: BOOT_IMAGE=/boot/kernel-2.6.37-gentoo-r4 root=/dev/sda2 ro
[ 23098.346] Build Date: 06 May 2011 01:31:14AM
[ 23098.346]
[ 23098.346] Current version of pixman: 0.20.2
[ 23098.346] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23098.346] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23098.347] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 6 17:47:48 2011
[ 23098.347] (==) Using config file: "/etc/X11/xorg.conf"
[ 23098.347] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23098.348] (==) ServerLayout "X.org Configured"
[ 23098.348] (**) |-->Screen "Screen0" (0)
[ 23098.348] (**) | |-->Monitor "Monitor0"
[ 23098.348] (**) | |-->Device "Card0"
[ 23098.348] (**) |-->Input Device "Mouse0"
[ 23098.348] (**) |-->Input Device "Keyboard0"
[ 23098.348] (==) Automatically adding devices
[ 23098.348] (==) Automatically enabling devices
[ 23098.349] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 23098.349] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 23098.349] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 23098.349] (WW) Disabling Mouse0
[ 23098.349] (WW) Disabling Keyboard0
[ 23098.349] (II) Loader magic: 0x8200de0
[ 23098.349] (II) Module ABI versions:
[ 23098.349] X.Org ANSI C Emulation: 0.4
[ 23098.349] X.Org Video Driver: 8.0
[ 23098.349] X.Org XInput driver : 11.0
[ 23098.349] X.Org Server Extension : 4.0
[ 23098.351] (--) PCI:*(0:3:0:0) 10de:0a64:1043:841f rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[ 23098.351] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 23098.351] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 23098.351] (II) LoadModule: "dbe"
[ 23098.352] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23098.352] (II) Module dbe: vendor="X.Org Foundation"
[ 23098.352] compiled for 1.9.4, module version = 1.0.0
[ 23098.352] Module class: X.Org Server Extension
[ 23098.352] ABI class: X.Org Server Extension, version 4.0
[ 23098.352] (II) Loading extension DOUBLE-BUFFER
[ 23098.352] (II) LoadModule: "glx"
[ 23098.353] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23098.353] (II) Module glx: vendor="X.Org Foundation"
[ 23098.353] compiled for 1.9.4, module version = 1.0.0
[ 23098.353] ABI class: X.Org Server Extension, version 4.0
[ 23098.353] (==) AIGLX enabled
[ 23098.353] (II) Loading extension GLX
[ 23098.353] (II) LoadModule: "dri"
[ 23098.354] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23098.354] (II) Module dri: vendor="X.Org Foundation"
[ 23098.354] compiled for 1.9.4, module version = 1.0.0
[ 23098.354] ABI class: X.Org Server Extension, version 4.0
[ 23098.354] (II) Loading extension XFree86-DRI
[ 23098.354] (II) LoadModule: "dri2"
[ 23098.355] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23098.355] (II) Module dri2: vendor="X.Org Foundation"
[ 23098.355] compiled for 1.9.4, module version = 1.2.0
[ 23098.355] ABI class: X.Org Server Extension, version 4.0
[ 23098.355] (II) Loading extension DRI2
[ 23098.355] (II) LoadModule: "extmod"
[ 23098.355] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23098.356] (II) Module extmod: vendor="X.Org Foundation"
[ 23098.356] compiled for 1.9.4, module version = 1.0.0
[ 23098.356] Module class: X.Org Server Extension
[ 23098.356] ABI class: X.Org Server Extension, version 4.0
[ 23098.356] (II) Loading extension MIT-SCREEN-SAVER
[ 23098.356] (II) Loading extension XFree86-VidModeExtension
[ 23098.356] (II) Loading extension XFree86-DGA
[ 23098.356] (II) Loading extension DPMS
[ 23098.356] (II) Loading extension XVideo
[ 23098.356] (II) Loading extension XVideo-MotionCompensation
[ 23098.356] (II) Loading extension X-Resource
[ 23098.356] (II) LoadModule: "record"
[ 23098.356] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23098.356] (II) Module record: vendor="X.Org Foundation"
[ 23098.356] compiled for 1.9.4, module version = 1.13.0
[ 23098.357] Module class: X.Org Server Extension
[ 23098.357] ABI class: X.Org Server Extension, version 4.0
[ 23098.357] (II) Loading extension RECORD
[ 23098.357] (II) LoadModule: "nvidia"
[ 23098.357] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 23098.357] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 23098.358] compiled for 4.0.2, module version = 1.0.0
[ 23098.358] Module class: X.Org Video Driver
[ 23098.358] (II) NVIDIA dlloader X Driver 260.19.36 Tue Jan 18 17:12:14 PST 2011
[ 23098.358] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 23098.358] (--) using VT number 7
[ 23098.372] (II) Loading sub module "fb"
[ 23098.372] (II) LoadModule: "fb"
[ 23098.372] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23098.373] (II) Module fb: vendor="X.Org Foundation"
[ 23098.373] compiled for 1.9.4, module version = 1.0.0
[ 23098.373] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23098.373] (II) Loading sub module "wfb"
[ 23098.373] (II) LoadModule: "wfb"
[ 23098.373] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 23098.374] (II) Module wfb: vendor="X.Org Foundation"
[ 23098.374] compiled for 1.9.4, module version = 1.0.0
[ 23098.374] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23098.374] (II) Loading sub module "ramdac"
[ 23098.374] (II) LoadModule: "ramdac"
[ 23098.374] (II) Module "ramdac" already built-in
[ 23098.374] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 23098.374] (==) NVIDIA(0): RGB weight 888
[ 23098.374] (==) NVIDIA(0): Default visual is TrueColor
[ 23098.374] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23098.375] (**) NVIDIA(0): Enabling RENDER acceleration
[ 23098.375] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 23098.375] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 23098.375] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 23098.375] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 23098.375] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 23098.966] (II) NVIDIA(0): NVIDIA GPU ION (GT218) at PCI:3:0:0 (GPU-0)
[ 23098.966] (--) NVIDIA(0): Memory: 524288 kBytes
[ 23098.966] (--) NVIDIA(0): VideoBIOS: 70.18.5d.00.1d
[ 23098.966] (II) NVIDIA(0): Detected PCI Express Link width: 1X
[ 23098.966] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 23098.966] (--) NVIDIA(0): Connected display device(s) on ION at PCI:3:0:0
[ 23098.966] (--) NVIDIA(0): Samsung SyncMaster (DFP-0)
[ 23098.966] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 23098.966] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[ 23099.053] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 23099.053] (II) NVIDIA(0): Validated modes:
[ 23099.053] (II) NVIDIA(0): "1400x1050"
[ 23099.053] (II) NVIDIA(0): Virtual screen size determined to be 1400 x 1050
[ 23099.088] (--) NVIDIA(0): DPI set to (86, 88); computed from "UseEdidDpi" X config
[ 23099.088] (--) NVIDIA(0): option
[ 23099.089] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 23099.089] (--) Depth 24 pixmap format is 32 bpp
[ 23099.089] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 23099.090] (II) NVIDIA(0): Initialized GPU GART.
[ 23099.096] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 23099.096] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 23099.096] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 23099.096] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 23099.096] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 23099.096] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 23099.096] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 23099.096] (II) NVIDIA(0): Config Options in the README.
[ 23099.097] (II) NVIDIA(0): Setting mode "1400x1050"
[ 23099.173] (II) Loading extension NV-GLX
[ 23099.213] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 23099.233] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 23099.233] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 23099.233] (==) NVIDIA(0): Backing store disabled
[ 23099.233] (==) NVIDIA(0): Silken mouse enabled
[ 23099.236] (==) NVIDIA(0): DPMS enabled
[ 23099.236] (II) Loading extension NV-CONTROL
[ 23099.237] (II) Loading extension XINERAMA
[ 23099.237] (II) Loading sub module "dri2"
[ 23099.237] (II) LoadModule: "dri2"
[ 23099.237] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23099.237] (II) NVIDIA(0): [DRI2] Setup complete
[ 23099.237] (==) RandR enabled
[ 23099.237] (II) Initializing built-in extension Generic Event Extension
[ 23099.237] (II) Initializing built-in extension SHAPE
[ 23099.237] (II) Initializing built-in extension MIT-SHM
[ 23099.238] (II) Initializing built-in extension XInputExtension
[ 23099.238] (II) Initializing built-in extension XTEST
[ 23099.238] (II) Initializing built-in extension BIG-REQUESTS
[ 23099.238] (II) Initializing built-in extension SYNC
[ 23099.238] (II) Initializing built-in extension XKEYBOARD
[ 23099.238] (II) Initializing built-in extension XC-MISC
[ 23099.238] (II) Initializing built-in extension XINERAMA
[ 23099.238] (II) Initializing built-in extension XFIXES
[ 23099.238] (II) Initializing built-in extension RENDER
[ 23099.238] (II) Initializing built-in extension RANDR
[ 23099.238] (II) Initializing built-in extension COMPOSITE
[ 23099.238] (II) Initializing built-in extension DAMAGE
[ 23099.264] (II) AIGLX: Screen 0 is not DRI2 capable
[ 23099.264] (II) AIGLX: Screen 0 is not DRI capable
[ 23099.271] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 23099.271] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 23099.858] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 23099.858] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23099.858] (II) LoadModule: "evdev"
[ 23099.859] (WW) Warning, couldn't open module evdev
[ 23099.859] (II) UnloadModule: "evdev"
[ 23099.859] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.859] (EE) No input driver matching `evdev'
[ 23099.867] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 23099.867] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23099.867] (II) LoadModule: "evdev"
[ 23099.868] (WW) Warning, couldn't open module evdev
[ 23099.868] (II) UnloadModule: "evdev"
[ 23099.868] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.868] (EE) No input driver matching `evdev'
[ 23099.882] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse (/dev/input/event2)
[ 23099.882] (**) Full-Speed Mouse Full-Speed Mouse: Applying InputClass "evdev pointer catchall"
[ 23099.882] (II) LoadModule: "evdev"
[ 23099.883] (WW) Warning, couldn't open module evdev
[ 23099.883] (II) UnloadModule: "evdev"
[ 23099.883] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.883] (EE) No input driver matching `evdev'
[ 23099.884] (II) config/udev: Adding input device Full-Speed Mouse Full-Speed Mouse (/dev/input/mouse0)
[ 23099.884] (II) No input driver/identifier specified (ignoring)
[ 23099.886] (II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event3)
[ 23099.886] (**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 23099.886] (II) LoadModule: "evdev"
[ 23099.887] (WW) Warning, couldn't open module evdev
[ 23099.887] (II) UnloadModule: "evdev"
[ 23099.887] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.887] (EE) No input driver matching `evdev'
[ 23099.888] (II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event4)
[ 23099.888] (**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 23099.888] (II) LoadModule: "evdev"
[ 23099.889] (WW) Warning, couldn't open module evdev
[ 23099.889] (II) UnloadModule: "evdev"
[ 23099.889] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.889] (EE) No input driver matching `evdev'
[ 23099.892] (II) config/udev: Adding input device PHILIPS MCE USB IR Receiver- Spinel plusf0r ASUS (/dev/input/event5)
[ 23099.892] (**) PHILIPS MCE USB IR Receiver- Spinel plusf0r ASUS: Applying InputClass "evdev pointer catchall"
[ 23099.892] (**) PHILIPS MCE USB IR Receiver- Spinel plusf0r ASUS: Applying InputClass "evdev keyboard catchall"
[ 23099.892] (II) LoadModule: "evdev"
[ 23099.893] (WW) Warning, couldn't open module evdev
[ 23099.893] (II) UnloadModule: "evdev"
[ 23099.893] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.893] (EE) No input driver matching `evdev'
[ 23099.894] (II) config/udev: Adding input device PHILIPS MCE USB IR Receiver- Spinel plusf0r ASUS (/dev/input/mouse1)
[ 23099.894] (II) No input driver/identifier specified (ignoring)
/etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dbe"
Load "glx"
Load "dri"
Load "dri2"
Load "extmod"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1400x1050"
EndSubSection
EndSection
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dbe"
Load "glx"
Load "dri"
Load "dri2"
Load "extmod"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1400x1050"
EndSubSection
EndSection
Иксы ставлю впервые. Обычно пользуюсь Ubuntu с гуем и кнопачками, но хочется лучше узнать линукс. Так что, прошу помочь.
Спасибо.
На крайний случай, может у кого есть интересная ссылка на эту тему. Хендбук конечно-же читаю.
___________________________________________________
Иксы запустились через startx, но в логах ошибка (EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0). Disable "Dri2" не помогает. Ставлю [РЕШЕНО], но прошу помочь доразобраться.
Уже ставлю гном. Еще раз всем большое спасибо за помощь!
чёрным по белому же:
Ставь то, на что ругается или исправляй скрипт xinitrc
/etc/X11/xinit/xinitrc: line 63: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 60: xclock: command not found
/etc/X11/xinit/xinitrc: line 62: xterm: command not found
/etc/X11/xinit/xinitrc: line 59: twm: command not found
/etc/X11/xinit/xinitrc: line 60: xclock: command not found
/etc/X11/xinit/xinitrc: line 62: xterm: command not found
/etc/X11/xinit/xinitrc: line 59: twm: command not found
Ставь то, на что ругается или исправляй скрипт xinitrc
/etc/X11/xinit/xinitrc: line 60: xclock: command not found
стесняюсь спросить, а зачем часы для старта иксов?
пусть ставит всё, если не поймёт, что именно из этого необходимо.
я указал направление, дальше пусть думает сам.
я указал направление, дальше пусть думает сам.
пусть ставит всё, если не поймёт, что именно из этого необходимо.
У меня с такой же фигней вроде одного xterm хватило. Подозреваю что если бы иксы запускали сразу какой-нибудь wm\de, то все это и вовсе было бы не нужно.
ну /etc/X11/xinit/xinitrc: line 59: twm: command not found как бы намекает :)
twm это же какой-то убогонький wm, нэ? Раз все равно им пользоваться никто не будет, то нефиг его ставить, а сразу ставить нормальный.
ну тогда, я тоже про это написал, надо править xinitrc. ну или маны читать.
А для проверки работоспособности иксов и twm хватит.
А для проверки работоспособности иксов и twm хватит.
дык.. ну ведь всё довольно-таки очевидно..
1. зачем сразу создавать xorg.conf? ведь последние иксы могут работать без этого файла.
2. на любом форуме вам могут рассказать как правильно смотреть логи иксов:
cat Xorg.0.log | grep EE
правда ведь стало удобнее?
из этого видно, что нету какого-то драйвера evdev. так почему бы его и не поставить? а потом еще раз посмотреть как стартуют иксы.
1. зачем сразу создавать xorg.conf? ведь последние иксы могут работать без этого файла.
2. на любом форуме вам могут рассказать как правильно смотреть логи иксов:
cat Xorg.0.log | grep EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23098.356] (II) Loading extension MIT-SCREEN-SAVER
[ 23098.375] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 23098.375] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 23098.375] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 23098.375] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 23098.375] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 23099.859] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.859] (EE) No input driver matching `evdev'
[ 23099.868] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.868] (EE) No input driver matching `evdev'
[ 23099.883] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.883] (EE) No input driver matching `evdev'
[ 23099.887] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.887] (EE) No input driver matching `evdev'
[ 23099.889] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.889] (EE) No input driver matching `evdev'
[ 23099.893] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.893] (EE) No input driver matching `evdev'
[ 23098.356] (II) Loading extension MIT-SCREEN-SAVER
[ 23098.375] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 23098.375] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 23098.375] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 23098.375] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 23098.375] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 23099.859] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.859] (EE) No input driver matching `evdev'
[ 23099.868] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.868] (EE) No input driver matching `evdev'
[ 23099.883] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.883] (EE) No input driver matching `evdev'
[ 23099.887] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.887] (EE) No input driver matching `evdev'
[ 23099.889] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.889] (EE) No input driver matching `evdev'
[ 23099.893] (EE) Failed to load module "evdev" (module does not exist, 0)
[ 23099.893] (EE) No input driver matching `evdev'
правда ведь стало удобнее?
из этого видно, что нету какого-то драйвера evdev. так почему бы его и не поставить? а потом еще раз посмотреть как стартуют иксы.
Удобнее, спасибо. Так вот стало
Это после того как я доустановил evdev, xterm и twm.
Сейчас если набрать startx
Я так понимаю no screens found. Но и другие ошибки конечно, т.е. какие-то модули.
Пока пробую, при дальнейших неудачах переустановлю иксы как советуют ниже.
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 301.384] (II) Loading extension MIT-SCREEN-SAVER
[ 301.416] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 301.417] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 301.418] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 301.418] (EE) No drivers available.
[ 301.384] (II) Loading extension MIT-SCREEN-SAVER
[ 301.416] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 301.417] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 301.418] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 301.418] (EE) No drivers available.
Это после того как я доустановил evdev, xterm и twm.
Сейчас если набрать startx
xauth: file /root/.serverauth.5676 does not exist
X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-gentoo-r4 i686 Gentoo
Current Operating System: Linux Josh 2.6.37-gentoo-r4 #1 SMP Tue May 3 22:13:20 CEST 2011 i686
Kernel command line: BOOT_IMAGE=/boot/kernel-2.6.37-gentoo-r4 root=/dev/sda2 ro
Build Date: 06 May 2011 01:31:14AM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 7 17:17:11 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "nouveau" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-gentoo-r4 i686 Gentoo
Current Operating System: Linux Josh 2.6.37-gentoo-r4 #1 SMP Tue May 3 22:13:20 CEST 2011 i686
Kernel command line: BOOT_IMAGE=/boot/kernel-2.6.37-gentoo-r4 root=/dev/sda2 ro
Build Date: 06 May 2011 01:31:14AM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 7 17:17:11 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "nouveau" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Я так понимаю no screens found. Но и другие ошибки конечно, т.е. какие-то модули.
Пока пробую, при дальнейших неудачах переустановлю иксы как советуют ниже.
Кроме emerge x11-drivers/nvidia-drivers которое я делал мне ничего в голову не приходит.
(EE) Failed to load module "nouveau" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.
поэтапно:
1. Икс-сервер пытается загрузить драйвер для NVIDIA (nouveau), но ничего не получается
2. Пытается загрузить vesa - не получается
3. Пытается загрузить fbdev - не получается
4. Ругается на отсутствие драйверов.
Решение:
- установи драйвер nouveau и будет тебе счастье :-)
на самом деле немного не так.
файл 20-nvidia.conf создается при установке проприетарных драйверов от nvidia, а в данном случае
X-сервер пытается использовать свободные драйвера (nouveau)
хотя, если установлен коммерческий драйвер, то и твой вариант подойдет.
файл 20-nvidia.conf создается при установке проприетарных драйверов от nvidia, а в данном случае
(EE) Failed to load module "nouveau" (module does not exist, 0)
X-сервер пытается использовать свободные драйвера (nouveau)
хотя, если установлен коммерческий драйвер, то и твой вариант подойдет.
Так вроде автор в комментах пытается именно nvidia-dirvers использовать.
x11-drivers/xf86-video-nouveau или x11-base/nouveau-drm имеется ввиду? И да, я пытаюсь, и изначально установил драйвера x11-drivers/nvidia-drivers.
При emerge x11-base/nouveau-drm
При emerge x11-base/nouveau-drm
* IMPORTANT: 3 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ] x11-base/nouveau-drm-20110415 0 kB
Total: 1 package (1 new), Size of downloads: 0 kB
Would you like to merge these packages? [Yes/No]
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) x11-base/nouveau-drm-20110415
* nouveau-drm-20110415.tar.gz RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* Package: x11-base/nouveau-drm-20110415
* Repository: gentoo
* Maintainer: [email protected] [email protected]
* USE: elibc_glibc kernel_linux userland_GNU x86
* FEATURES: sandbox
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found kernel object directory:
* /lib/modules/2.6.37-gentoo-r4/build
* Found sources for kernel version:
* 2.6.37-gentoo-r4
* Checking for suitable kernel configuration options...
* CONFIG_DRM: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Once you have satisfied these options, please try merging
* this package again.
* ERROR: x11-base/nouveau-drm-20110415 failed (setup phase):
* Incorrect kernel configuration options
*
* Call stack:
* ebuild.sh, line 56: Called pkg_setup
* nouveau-drm-20110415.ebuild, line 27: Called linux-mod_pkg_setup
* linux-mod.eclass, line 585: Called linux-info_pkg_setup
* linux-info.eclass, line 904: Called check_extra_config
* linux-info.eclass, line 798: Called die
* The specific snippet of code:
* die "Incorrect kernel configuration options"
*
* If you need support, post the output of 'emerge --info =x11-base/nouveau-drm-20110415',
* the complete build log and the output of 'emerge -pqv =x11-base/nouveau-drm-20110415'.
* The complete build log is located at '/var/tmp/portage/x11-base/nouveau-drm-20110415/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-base/nouveau-drm-20110415/temp/die.env'.
* S: '/var/tmp/portage/x11-base/nouveau-drm-20110415/work/master'
>>> Failed to emerge x11-base/nouveau-drm-20110415, Log file:
>>> '/var/tmp/portage/x11-base/nouveau-drm-20110415/temp/build.log'
* Messages for package x11-base/nouveau-drm-20110415:
* CONFIG_DRM: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Once you have satisfied these options, please try merging
* this package again.
* ERROR: x11-base/nouveau-drm-20110415 failed (setup phase):
* Incorrect kernel configuration options
*
* Call stack:
* ebuild.sh, line 56: Called pkg_setup
* nouveau-drm-20110415.ebuild, line 27: Called linux-mod_pkg_setup
* linux-mod.eclass, line 585: Called linux-info_pkg_setup
* linux-info.eclass, line 904: Called check_extra_config
* linux-info.eclass, line 798: Called die
* The specific snippet of code:
* die "Incorrect kernel configuration options"
*
* If you need support, post the output of 'emerge --info =x11-base/nouveau-drm-20110415',
* the complete build log and the output of 'emerge -pqv =x11-base/nouveau-drm-20110415'.
* The complete build log is located at '/var/tmp/portage/x11-base/nouveau-drm-20110415/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-base/nouveau-drm-20110415/temp/die.env'.
* S: '/var/tmp/portage/x11-base/nouveau-drm-20110415/work/master'
* IMPORTANT: 3 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
* Use eselect news to read news items.
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild N ] x11-base/nouveau-drm-20110415 0 kB
Total: 1 package (1 new), Size of downloads: 0 kB
Would you like to merge these packages? [Yes/No]
>>> Verifying ebuild manifests
>>> Emerging (1 of 1) x11-base/nouveau-drm-20110415
* nouveau-drm-20110415.tar.gz RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* Package: x11-base/nouveau-drm-20110415
* Repository: gentoo
* Maintainer: [email protected] [email protected]
* USE: elibc_glibc kernel_linux userland_GNU x86
* FEATURES: sandbox
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found kernel object directory:
* /lib/modules/2.6.37-gentoo-r4/build
* Found sources for kernel version:
* 2.6.37-gentoo-r4
* Checking for suitable kernel configuration options...
* CONFIG_DRM: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Once you have satisfied these options, please try merging
* this package again.
* ERROR: x11-base/nouveau-drm-20110415 failed (setup phase):
* Incorrect kernel configuration options
*
* Call stack:
* ebuild.sh, line 56: Called pkg_setup
* nouveau-drm-20110415.ebuild, line 27: Called linux-mod_pkg_setup
* linux-mod.eclass, line 585: Called linux-info_pkg_setup
* linux-info.eclass, line 904: Called check_extra_config
* linux-info.eclass, line 798: Called die
* The specific snippet of code:
* die "Incorrect kernel configuration options"
*
* If you need support, post the output of 'emerge --info =x11-base/nouveau-drm-20110415',
* the complete build log and the output of 'emerge -pqv =x11-base/nouveau-drm-20110415'.
* The complete build log is located at '/var/tmp/portage/x11-base/nouveau-drm-20110415/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-base/nouveau-drm-20110415/temp/die.env'.
* S: '/var/tmp/portage/x11-base/nouveau-drm-20110415/work/master'
>>> Failed to emerge x11-base/nouveau-drm-20110415, Log file:
>>> '/var/tmp/portage/x11-base/nouveau-drm-20110415/temp/build.log'
* Messages for package x11-base/nouveau-drm-20110415:
* CONFIG_DRM: should not be set. But it is.
* Please check to make sure these options are set correctly.
* Failure to do so may cause unexpected problems.
* Once you have satisfied these options, please try merging
* this package again.
* ERROR: x11-base/nouveau-drm-20110415 failed (setup phase):
* Incorrect kernel configuration options
*
* Call stack:
* ebuild.sh, line 56: Called pkg_setup
* nouveau-drm-20110415.ebuild, line 27: Called linux-mod_pkg_setup
* linux-mod.eclass, line 585: Called linux-info_pkg_setup
* linux-info.eclass, line 904: Called check_extra_config
* linux-info.eclass, line 798: Called die
* The specific snippet of code:
* die "Incorrect kernel configuration options"
*
* If you need support, post the output of 'emerge --info =x11-base/nouveau-drm-20110415',
* the complete build log and the output of 'emerge -pqv =x11-base/nouveau-drm-20110415'.
* The complete build log is located at '/var/tmp/portage/x11-base/nouveau-drm-20110415/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-base/nouveau-drm-20110415/temp/die.env'.
* S: '/var/tmp/portage/x11-base/nouveau-drm-20110415/work/master'
* IMPORTANT: 3 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
Честно, я не знаю как посмотреть. Приходит в голову только вариант найти конфиг ядра, который появился когда я его собирал, и заглянуть туда.
Если так нормально, то cat .config | grep DRM
Если так нормально, то cat .config | grep DRM
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
>CONFIG_DRM=y
>CONFIG_DRM: should not be set. But it is.
Теперь ты знаешь что делать :3
>CONFIG_DRM: should not be set. But it is.
Теперь ты знаешь что делать :3
Отключить CONFIG_DRM и пересобрать ядрецо.
Ведь можно поправить конфиг на CONFIG_DRM=n и запустить make && make modules_install? Т.е. без make menuconfig. Прошу прощения, оно кажется логичным, просто не хочу за зря прождать время компиляции ядра...
Готово. И... опять ничего.
# eselect opengl set nvidia
Switching to nvidia OpenGL interface... done
# X
Пытаюсь установить dri, о не уверен, что качать, т.е. что это?
# emerge dri
# eselect opengl set nvidia
Switching to nvidia OpenGL interface... done
# X
X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-gentoo-r4 i686 Gentoo
Current Operating System: Linux Josh 2.6.37-gentoo-r4 #1 SMP Tue May 3 22:13:20 CEST 2011 i686
Kernel command line: BOOT_IMAGE=/boot/kernel-2.6.37-gentoo-r4 root=/dev/sda2 ro
Build Date: 10 May 2011 01:15:06AM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 17 12:26:07 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "dri" (module does not exist, 0)
(EE) Failed to load module "dri2" (module does not exist, 0)
(EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-gentoo-r4 i686 Gentoo
Current Operating System: Linux Josh 2.6.37-gentoo-r4 #1 SMP Tue May 3 22:13:20 CEST 2011 i686
Kernel command line: BOOT_IMAGE=/boot/kernel-2.6.37-gentoo-r4 root=/dev/sda2 ro
Build Date: 10 May 2011 01:15:06AM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 17 12:26:07 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "dri" (module does not exist, 0)
(EE) Failed to load module "dri2" (module does not exist, 0)
(EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
Пытаюсь установить dri, о не уверен, что качать, т.е. что это?
# emerge dri
* IMPORTANT: 3 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
These are the packages that would be merged, in order:
Calculating dependencies... done!
emerge: there are no ebuilds to satisfy "dri".
emerge: searching for similar names...
emerge: Maybe you meant any of these: sys-block/di, media-fonts/droid, dev-haskell/drift?
* IMPORTANT: 3 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
* Use eselect news to read news items.
These are the packages that would be merged, in order:
Calculating dependencies... done!
emerge: there are no ebuilds to satisfy "dri".
emerge: searching for similar names...
emerge: Maybe you meant any of these: sys-block/di, media-fonts/droid, dev-haskell/drift?
* IMPORTANT: 3 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
Нашел что-то в нете, что меня вернуло к http://www.gentoo.org/doc/en/nvidia-guide.xml.
*читаю*
*читаю*
Согласно этому посту, т.к. dri уже внутри драйверов nvidia нужно добавить в xorg.conf
(EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
~ # cat xorg.conf.new
Section "Module"
Disable "dri"
Disable "dri2"
EndSection
Но сделав так, я получаю при X -config /root/xorg.conf.newDisable "dri"
Disable "dri2"
EndSection
(EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0)
~ # cat xorg.conf.new
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dbe"
#Load "dri"
Load "glx"
Load "extmod"
Load "record"
Disable "dri"
Disable "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dbe"
#Load "dri"
Load "glx"
Load "extmod"
Load "record"
Disable "dri"
Disable "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Если написать # startx, а не # X, то запускаются окна. Честно, я думал, что в этом случае нет разницы.
Но тем не менее, запуская иксы через SSH, на главном мониторе появляются консольки и часики, что радует, а в SSH по прежнему вижу (EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0).
Как от этого избавиться?
Но тем не менее, запуская иксы через SSH, на главном мониторе появляются консольки и часики, что радует, а в SSH по прежнему вижу (EE) NVIDIA: Failed to load module "dri2" (module does not exist, 0).
Как от этого избавиться?
Установил драйвер, но такой папки и файла вообще нет. Я конечно создал..
Судя по логам, версия иксов 1.9.4.
Судя по логам, версия иксов 1.9.4.
cat Xorg.0.log | grep EE
не мое, но Хватит грепать кошку! (с) =)
grep EE Xorg.0.log
Не грепать а пайпить — такие комбинации встречаются не только с грепом.
"Stop piping cats" — как-то так.
"Stop piping cats" — как-то так.
И в make.conf еще в INPUT_DEVICES воткнуть evdev и nvidia в VIDIO_CARS, если вдруг еще не. И перекомпилять это дело еще.
Плюс сдается мне, что гайд устаревший, ибо там еще xorg.conf, а не xorg.conf.d/. Я по-моему по этому гайду делал: http://www.gentoo.org/proj/en/desktop/x/x11/xorg-server-1.8-upgrade-guide.xml
Плюс сдается мне, что гайд устаревший, ибо там еще xorg.conf, а не xorg.conf.d/. Я по-моему по этому гайду делал: http://www.gentoo.org/proj/en/desktop/x/x11/xorg-server-1.8-upgrade-guide.xml
X.Org X Server 1.9.4.
xorg.conf.d был, но после неудач запустить иксы я его переименовал. Просто помнил что раньше у меня было просто xorg.conf.
Перед тем как перекомпилить, стоит удалять emerge -c, или это лишнее?
xorg.conf.d был, но после неудач запустить иксы я его переименовал. Просто помнил что раньше у меня было просто xorg.conf.
Перед тем как перекомпилить, стоит удалять emerge -c, или это лишнее?
Не уверен, что я правильно выразился. Дело в том, что раньше если я хотел переустановить программу, я её удалял emerge -c curl, а потом заново устанавливал. Может удаление было излишне...
раз английский не проблема рекомендую
http://www.gentoo.org/doc/en/xorg-config.xml
помому что например
INPUT_DEVICES="keyboard mouse" - устарело, рекомендуют
INPUT_DEVICES="evdev" и т.д.
http://www.gentoo.org/doc/en/xorg-config.xml
помому что например
INPUT_DEVICES="keyboard mouse" - устарело, рекомендуют
INPUT_DEVICES="evdev" и т.д.
Пакет x11-drivers/xf86-input-evdev тоже неплохо бы поставить, если еще нет.
Нечего иксы под рутом запускать.
От обычного пользователя startx что пишет?..
От обычного пользователя startx что пишет?..
То же самое, что и под рутом. Но это уже после установки xterm и twm.
советую прописать
VIDEO_CARDS="открытй или закрытый драйвер"
INPUT_DEVICES="evdev"
и персобрать xorg-server. нужные пакеты сами доустановятся
VIDEO_CARDS="открытй или закрытый драйвер"
INPUT_DEVICES="evdev"
и персобрать xorg-server. нужные пакеты сами доустановятся
Что-то ты заглох, касатик, завелось али нет? Коль завелось «решено» поставь.
Временно не имел доступа к компу. По началу думал прочитать ещё какую нибудь инфу про иксы. Потом навалилась куча житейских проблем, и генту пришлось отложить в сторонку. Ниже напишу, что я попробовал.
С таки вот make.conf я пересобрал (вроде и для себя неожиданно) все.
# cat /etc/make.conf
(emerge -eNu xorg-X11)
При запуске иксов...
# X
Иногда при запуске вижу на мониторе логотип nvidia, но все это пропадает через несколько секунд.
# cat Xorg.0.log | grep EE
Наверно я что-то пропускаю. Мне кажется, что я все установил. В /etc/X11/xorg.conf правда не прописано разрешение, но тут вроде говорят, что и без ксорга иксы должны включаться.
# cat /etc/make.conf
CHOST="i686-pc-linux-gnu"
CFLAGS="-O2 -march=core2 -mfpmath=sse -fomit-frame-pointer -pipe"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2"
EMERGE_DEFAULT_OPTS="--jobs=2"
USE="X udev opengl xorg vdpau -gtk -qt sse sse2"
EMERGE_DEFAULT_OPTS = "--ask --verbose"
#PORTAGE_TMPDIR="/tmp
INPUT_DEVICES="evdev"
VIDEO_CARDS="nvidia"
CFLAGS="-O2 -march=core2 -mfpmath=sse -fomit-frame-pointer -pipe"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2"
EMERGE_DEFAULT_OPTS="--jobs=2"
USE="X udev opengl xorg vdpau -gtk -qt sse sse2"
EMERGE_DEFAULT_OPTS = "--ask --verbose"
#PORTAGE_TMPDIR="/tmp
INPUT_DEVICES="evdev"
VIDEO_CARDS="nvidia"
(emerge -eNu xorg-X11)
При запуске иксов...
# X
X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-gentoo-r4 i686 Gentoo
Current Operating System: Linux Josh 2.6.37-gentoo-r4 #1 SMP Tue May 3 22:13:20 CEST 2011 i686
Kernel command line: BOOT_IMAGE=/boot/kernel-2.6.37-gentoo-r4 root=/dev/sda2 ro
Build Date: 10 May 2011 01:15:06AM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 17 10:49:19 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-gentoo-r4 i686 Gentoo
Current Operating System: Linux Josh 2.6.37-gentoo-r4 #1 SMP Tue May 3 22:13:20 CEST 2011 i686
Kernel command line: BOOT_IMAGE=/boot/kernel-2.6.37-gentoo-r4 root=/dev/sda2 ro
Build Date: 10 May 2011 01:15:06AM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 17 10:49:19 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
Иногда при запуске вижу на мониторе логотип nvidia, но все это пропадает через несколько секунд.
# cat Xorg.0.log | grep EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1510.814] (II) Loading extension MIT-SCREEN-SAVER
[ 1510.827] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 1510.827] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 1510.827] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 1510.827] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 1510.827] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
[ 1510.814] (II) Loading extension MIT-SCREEN-SAVER
[ 1510.827] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 1510.827] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 1510.827] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 1510.827] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 1510.827] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
Наверно я что-то пропускаю. Мне кажется, что я все установил. В /etc/X11/xorg.conf правда не прописано разрешение, но тут вроде говорят, что и без ксорга иксы должны включаться.
У тебя симлинк на /usr/src/linux правильный?
eselect opengl list что говорит?
eselect opengl list что говорит?
# eselect opengl list
Available OpenGL implementations:
[1] nvidia
[2] xorg-x11 *
Available OpenGL implementations:
[1] nvidia
[2] xorg-x11 *
На гентувики есть статья с настройкой проприетарных дровишек. Конфиг все равно писать придется.
С моей 7600GT конфиг выглядит так:
И потом еще eselect'ом поставьте opengl нвидиевский.
С моей 7600GT конфиг выглядит так:
$ cat /etc/X11/xorg.conf.d/10-nvidia.conf
Section "Device"
Identifier "GeForce 7600GT"
Driver "nvidia"
VideoRam 65536
EndSection
Section "Module"
Load "glx"
Disable "dri"
Disable "GLcore"
EndSection
Section "Device"
Identifier "GeForce 7600GT"
Driver "nvidia"
VideoRam 65536
EndSection
Section "Module"
Load "glx"
Disable "dri"
Disable "GLcore"
EndSection
И потом еще eselect'ом поставьте opengl нвидиевский.
Я так понимаю не есть правильно, что директории /etc/X11/xorg.conf.d/ у меня нет..?
Создал. Просто по мне так это могло быть симптомом проблем с драйвером.
В данный момент пересобираю ядро. post/5757/#cmnt104125
В данный момент пересобираю ядро. post/5757/#cmnt104125
2) установить evdev
3) посмотреть в /etc/X11/xinit/xinitrc - почему ругается так сильно